What’s it like to use the Anker Soundcore Boom 2?

The LED lights will pulse in sync with the beat of your music.

With its robust plastic housing, the Anker Soundcore Boom 2 is built to handle adventure life and travel with all its bumps and bruises. Considering this speaker is designed to float on water, it’s safe to say it will also survive a rainy camping trip or a day at the lake. A lightweight aluminum grill protects the two tweeters and subwoofer, the buttons sit almost flush in the housing, and even the LED light passive radiators on the side are recessed for protection.

Though the Boom 2 isn’t the most compact Bluetooth speaker, it is still reasonably portable with a built-in handle. You’ll find the USB-C charge port and a USB-A courtesy outlet socket on the back of the speaker. Once powered up, it connects quickly to your device, and the side LEDs will fire up. While the lighting effects are a fun addition when using the speaker outdoors, some modes can get slightly distracting in a more intimate indoor setting. If so, you can dim or turn them off via the companion app.

How do you control the Anker Soundcore Boom 2?

It’s officially a party once BassUP mode is engaged.

The Soundcore Boom 2 controls are located along the top of the speaker’s enclosure. Once the speaker is turned on, the power and Bluetooth buttons are nicely backlit, but the volume and play/pause buttons are not. While perhaps just a clever way to prevent any party attendees from adjusting your volume, I would prefer them to be backlit as well. Below is a breakdown of how the buttons operate.

You can also control various features through the Soundcore app, including volume, EQ settings, LED settings, and the brightness of the backlit controls. If you have two Boom 2 speakers, you can pair them together by long pressing the Bluetooth pairing button. But wait, there’s more!

The Boom 2 also features PartyCast 2.0, which allows you to connect up to 100 Soundcore PartyCast 2.0-supported products simultaneously. Now there’s a party I don’t want to miss!

Should you use the app for the Anker Soundcore Boom 2?

Customize your EQ or your light show via the Soundcore app.

Downloading and installing the Soundcore app allows you to customize your Boom 2 settings and features. You can select from four preset EQ options or fine-tune your sound with the 9-band custom EQ. You can also modify the lighting settings. While there are seven different types of lighting effects available, you also have the option to dim or turn them off entirely if you want to preserve your battery life.

What Bluetooth codecs does the Anker Soundcore Boom 2 support?

The Soundcore Boom 2 connects to your device via Bluetooth 5.3 and is SBC only.

How long does the Anker Soundcore Boom 2’s battery last?

You can charge your phone with the Boom 2’s 7.3v/4900 mAh built-in battery.

Anker states a 5.5-hour charge time and is advertising a 24-hour playback time with the Soundcore Boom 2 at 50% volume, without Bass UP or lighting effects engaged.

In our standardized battery test, we were able to squeeze a whopping 27 hours and 8 minutes of playback time out of the Boom 2 using those same settings.

How does the Anker Soundcore Boom 2 sound?

You can go ahead and drop it in the pool if you want. It’ll float!

Thanks to the low-end provided by the built-in subwoofer and the “Bass UP” technology, the Soundcore Boom 2 will keep a sizeable outdoor gathering moving. Engaging Bass UP mode will boost the subwoofer’s output from 40 to 50 watts and the dual tweeters from 10 watts to 15 each, offering 80w of output total.

However, even with Bass UP engaged, there is still room for more. The stock “Soundcore Signature” EQ preset is a great place to start your listening experience, but the key to unlocking an extra dose of bass out of the Boom 2 is in the 9-band EQ. This full-band EQ allows you to select and boost frequencies as low as 48Hz, so there is room to tweak; it’s worth experimenting if you want to squeeze even more low-end from the 50-watt subwoofer.

This greatly impacted the bass response while listening to Lose Yourself to Dance by Daft Punk. Even with a full and rumbling low end, Nile Rodgers’s clean yet percussive rhythm guitar still cuts through the center of the mix. Again, diving into the full-band EQ and adding a boost to the treble frequencies around 8kHz helped add some sonic clarity to the hi-hats and cymbals, as well as the classic accompanying hand claps accents sprinkled throughout the track.

You can dim the LED lights via the companion if you find them too distracting.

Of course, all parties wind down eventually. Los Padres is a laid-back tune by Tommy Guerrero that gives off more of a chill, sitting around the campfire vibe. Returning to the Soundcore Signature with Bass UP engaged in this setting provided a complete and reasonably even sound without any overpowering or distracting low end.

While this party speaker isn’t meant for critical listening, the custom EQ allows you to easily dial in the Boom 2 to your taste, regardless of the party vibe.

Can you use the Anker Soundcore Boom 2 for phone calls?

With a single press of the Play/Pause button, you can take and end a phone call thanks to the speaker’s built-in microphone. Most of us would instead pick up the phone, but you can use it for a quick chat with a friend if you need to.

Should you buy the Anker Soundcore Boom 2?

If you have two Boom 2 speakers, you can pair them together for an authentic stereo-listening experience.

The Boom 2 is an excellent choice if you’re looking for a speaker to take on outdoor adventures or even just for backyard BBQs. It’s built to survive the elements, deliver decent sound with plenty of low-end, and at $129.99 , it won’t break the bank either. The LED lights also do a great job of adding to the party vibes.

What should you get instead of the Anker Soundcore Boom 2

The Motion X500 is ready for the outdoors with an IPX7 protection rating.

If you’re after something a little more stylish in appearance that can still handle the outdoors, the Anker Soundcore Motion X500 is worth a look. While it’s not floatable like the Boom 2, it’s still portable with an IPX7 water resistance rating. Its unique 3-driver layout includes an upward-firing driver that helps provide a full listening experience in group settings, and you’ll still be able to take advantage of the multi-band EQ in the Soundcore app to fine-tune your sound.

The JBL Charge 6 () is also now on the scene. The latest iteration of this fan-favorite JBL speaker now features improved bass response, battery life, and a new handle. If you’re looking for something a little more packable than the Boom 2, check out the video above to learn more about the new JBL Charge 6.

Frequently asked questions